Learn How to Sew Triangles
Become a triangle master with this DVD! In mere minutes, watch the 6 Different Ways to Sew Half-Square Triangles together. In this DVD, you will see from start to finish each of the 6 methods for sewing half-square triangles together described in this series of articles. No guessing what to do next, you see it all. Watch as I sew and share my secrets for success with each of these methods. This one DVD will save you hours of sewing time, will increase the accuracy of your sewing, making your blocks fit together better AND, may save your sanity! |
Maybe you've heard about straight grain, cross grain and bias cuts of fabric, and wondered what it is all about.
Here is a brief description of what it all is and what it means in the quilting world.
When fabric is woven, manufacturers place the lengthwise threads (warp) tightly in their loom, to prevent stretching which would cause the fabric to be mis-shapen.
The crosswise threads (weft) are then woven into the lengthwise threads. However, they are not stitched as tightly as the lengthwise threads, allowing some "give" in the finished fabric.
Selvedges are created as the crossgrain threads are woven back and forth through the straightgrain (lengthwise). The selvedge is extremely tightly woven, and often has the name of the manufacturer printed, as shown in the picture below.
|
The bias is a 45º angle cut between the cross grain and the lengthwise grain of the fabric. Although it may look somewhat confusing in the photograph above, bias can be cut in either direction.
A true bias is cut at a 45º angle, however, cutting at a 30º or 60º angle to make triangles or diamonds will also result in a bias cut.
The bias has the most stretch, and fabric cut on the bias frequently used for binding and decorative fabric. Bias can be easily used for making circles, squiggles, and zigzags.
Read more about sewing triangles:
Learn 6 different ways to sew half-square triangles together:
Happy Quilting!
Penny Halgren
Master Quilter
